Search results
Results From The WOW.Com Content Network
189.42 mL. 6.39 US fl oz. 6.66 imp oz. 1⁄3 of an Imperial pint. Short for Nipperkin. Strong ale and Barley wine were usually bottled in nips [ 3] Metric measurement glasses and containers usually round up to a metric half pint of 200 mL (7 imp oz). small glass (US) 236.59 mL. 8 US fl oz.
Alcohol by volume (abbreviated as alc/vol or ABV) is a standard measure of the volume of alcohol contained in a given volume of an alcoholic beverage, expressed as a volume percent. [ 1][ 2][ 3] It is defined as the number of millilitres (mL) of pure ethanol present in 100 mL (3.5 imp fl oz; 3.4 US fl oz) of solution at 20 °C (68 °F).
Each contains about 14 grams or 17.7 ml of ethanol. A standard drink or (in the UK) unit of alcohol is a measure of alcohol consumption representing a fixed amount of pure alcohol. The notion is used in relation to recommendations about alcohol consumption and its relative risks to health. It helps to educate alcohol users. [ 1]
The US fluid ounce is based on the US gallon, which in turn is based on the wine gallon of 231 cubic inches that was used in the United Kingdom prior to 1824. With the adoption of the international inch, the US fluid ounce became 1⁄128 gal × 231 in 3 /gal × (2.54 cm/in) 3 = 29.5735295625 mL exactly, or about 4% larger than the imperial unit.
For a complete list of all dimensions, see full list of units . { {Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by { {convert}} as the second and third ...
30 to 44 ml (1.0 to 1.5 US fl oz) 59 to 89 ml (2 to 3 US fl oz) There is no official size for a single shot, except in Utah, where a shot is defined as 1.5 US fl oz (44.4 ml). [25] Elsewhere in the U.S., the standard size is generally considered to be 1.25–1.5 US fl oz (37–44 ml).
Length. For measuring length, the U.S. customary system uses the inch, foot, yard, and mile, which are the only four customary length measurements in everyday use. From 1893, the foot was legally defined as exactly 1200⁄3937 m (approximately 0.304 8006 m ). [ 13] Since July 1, 1959, the units of length have been defined on the basis of 1 yd ...
Conversion of units is the conversion of the unit of measurement in which a quantity is expressed, typically through a multiplicative conversion factor that changes the unit without changing the quantity. This is also often loosely taken to include replacement of a quantity with a corresponding quantity that describes the same physical property ...